LAFD PPE Drill Practice Test

These questions are part of the practice quiz. Start practicing

• HUD Low status is represented by what, and what is the pressure range?
• On brush helmets, what color and size are the last name initials displayed on the rear brim?
• Under what condition may a helmet not be worn while riding on an emergency apparatus?
• How many distinct incidents are listed as occasions to wear body armor?
• Which material are the ballistic panels made of?
• Which form do you need to use to repair equipment?
• Which of the following incidents is explicitly listed as requiring body armor?
• Which of the following is NOT a stated feature of the brush gloves?
• What is the recommended washing procedure for the hood?
• What is the PSI rating for the Universal air connection (UAC)?
• Brush helmets are washed in the same manner as which other helmet type?
• The T toe design primarily improves what?
• What pockets do Wildland yellow pants have?
• Goggles lens material and treatment
• What is the surface composition of the thermal layer?
• What is the price of the structure helmet as listed?
• How do you turn the speaker module on/off?
• What temperature is used to rinse the facepiece after cleaning?
• Which statement is not part of the described glove construction?
• When is it company discretion for wearing turnouts?
• In brush and grass fires, where should the hood be kept?
• How can you clean the Nomex head harness?
• When should Brush helmet inspections occur and what should be checked?
• What is the composition of the moisture barrier in the turnout coat?
• What is the purpose of the helmet shell release mechanism?
• Who distributes the work uniforms?
• What is the percentage breakdown of the outer shell's PBI/Aramid mix?
• Boots can withstand how many volts?
• Hood meets which UL classification?
• Reflectors on brush shirt: how many and where placed?
• What protection rating does the vest have?
• Which glove policy is specified for gloves usage?
• What color is assigned to all other ranks for helmet color?
• Boots are made of what material composition?
• How should the ballistic vest be covered?
• Brush gloves model
• Which other certifying body has signed off on the MSA G1 SCBA?
• How many lumbar support settings does the equipment have?
• What are the hood measurements?
• Brush gloves made of
• What year is associated with the NFPA rating for brush goggles?
• When should the vest be worn?
• Turnout boots can be worn with which bottom clothing?
• What is the primary role of the first stage regulator?
• After washing, how should gloves be dried?
• How many side handles and top handle are present on the equipment, and what are their load ratings?
• What does the large red knob on the second stage regulator do?
• How long does the SCBA battery last during continuous use?
• When should firefighting hoods be worn?
• What is the air capacity of the MSA G1 45 min bottle?
• Who manufactures the wildland shroud?
• Boots are how tall and what feature?
• What is the make and model of the structure helmet?
• Model name of the structure glove?
• What are the components of the boot bottom?
• Which button color initiates PASS activation during the iTIC procedure?
• What is the diameter of the 45-minute bottle?
• Turnout boots meet which NFPA standards?
• What is the material composition of the yellow brush jacket and pants?
• How do you clean the facepiece?
• According to the notes, the Akins incident 24-2 illustrates what about plastic shatters?
• What brand supplies the brush jacket and the yellow brush pants?
• What is the exact composition of the uniform material?
• What is the cost of the Brush helmet?
• What description corresponds to the HUD status Full?
• How many buddy lights are on the SCBA?
• How are Wildland pants secured over work boots?
• What is the hood make and model?
• Which of the following is NOT listed as a unique feature of the MSA G1 bottle?
• What does the steel shank and toe do?
• When should brush helmets be worn?
• How should the work uniform be cleaned?
• During glove inspection, which indicator would suggest hazmat contamination?
• Which incident requires body armor according to volume 2?
• Which event occurs last in the iTIC activation sequence?
• When should the battery be replaced?
• What is the brush shirt brand?
• In brush incidents where structure firefighters will not be part of the operation, which attire may be worn?
• Nomex pants brand?
• What is the facepiece made of?
• What document is used for brush helmet repair and replacement requests?
• Which NFPA standards do the blue brush pants meet?
• Why is the hood gold colored?
• What is the stated decomposition temperature range for the coat's outer shell based on reference turnouts?
• Which color indicates a full alarm?
• What is the weight of the facepiece?
• After how many seconds does the PASS start sounding, and after how many seconds does it reach full alarm?
• Which additional layer is mentioned for the back of the hand?
• Goggles model specified
• Which reflector features does the Brush helmet have?
• What material is the coat's outer shell (PBI Max) made from?
• What is the width of the storm flap over the front zipper on the brush jacket?
• What happens when the battery reaches 40% on the HUD?
• When and how to replace turnout boots?
• When will structure gloves be worn?
• How many major crown ribs and minor ribs does the structure helmet have?
• What brand makes the work boots?
• When can the work boots be worn?
• What protection does the Gore Crosstech insert provide?
• What is the total count of handles described on the equipment?
• How long does it take to fully recharge a completely depleted battery?
• What are the passport dimensions used for helmet identification on each side?
• How do you activate the iTIC without turning on the bottle?
• The inner layer of gloves is made of which material?
• For automatic alarms, when must the turnout coat be donned?
• Brush goggles model
• Under the PPE drills policy, when should structure helmets be worn?
• How does the first stage regulator connect to the bottle?
• Who can connect to the UEBSS?
• How long should the facepiece be submerged during cleaning?
• Who is the maker of the turnout coat and pants?
• How long is the Universal Emergency Breathing Safety System (UEBSS)?
• What is the maintenance for turnouts?
• Turnout pants may be worn at the discretion of the company commander in which scenario?
• At what interval does the PASS calculate breathing rate and air consumption after initial start?
• How many iTIC palettes are there?
• Which HUD indicator shows PASS is in pre-alarm?
• Turnout pants are required for which incidents?
• How can the brush jacket be replaced?
• The boots are rated to which NFPA standard?
• When should the one-piece face mask/eye shield be worn?
• What percentage of aramid is in the brush shirt blend?
• What is the lens material of the Defender Visor?
• Which feature aids in easy donning and doffing?
• The pneumatic bell starts at 1575 PSI and stops at what pressure?
• What is the composition of the SCBA bottle?
• How many speakers are located on the harness?
• What force triggers the helmet shell release system?
• How many pockets are on the pants of the uniform?
• When are dust respirators used?
• What is the normally used citro squeeze to water ratio for washing turnouts?
• Where is the ID located on the brush jacket relative to the LAFD logo?
• The outer shell decomposition temperature data is based on turnouts from which brand?
• Are solvents permitted when cleaning the structure helmet shell?
• To what approximate pressure does the first stage regulator reduce the air cylinder pressure?
• Which component connects to the bottle with a large gray quick-connect fitting?
• During a first stage regulator failure, which statement accurately describes the regulator's behavior?
• Which description matches the HUD status 1/2?
• What color identifies captains on brush helmets?
• What is the brush shirt made of?
• Which of the following incidents is NOT listed as requiring body armor?
• What is the proper procedure to exchange a damaged brush helmet?
• What color are the captain's letters on the outer rear protective brim?
• The vest does not protect against which type of ammunition?
• Where should the labeling be placed on the hood?
• Chinstrap specifications and buckle on the structure helmet?
• How long should the green button be held to activate the iTIC after silencing the PASS?
• Which design feature secures the bottle to the harness?
• What is the material composition of the edge trim on the structure helmet?
• How often should you visually inspect soft goods on the helmet?
• What temperature rating and duration is the structure helmet rated for?
• What step must be done before washing turnout gear?
• What accessory is provided at the back of the helmet for hanging?
• What is the fabric composition of the yellow brush jacket and pants?
• Which securing method for the bottle is not the dovetail design?
• What are the dimensions and color of the reflector material?
• When should boots be inspected?
• Which statement describes a purpose of the moisture barrier?
• Which description best matches the moisture barrier composition?
• How many ribs are part of the Brush helmet's trademarked design?
• What is the warranty period for the structure helmet?
• Who connects to the UAC?
• What percentage of polyamide is in the brush shirt composition?
• When should brush lightweight overpants be worn?
• Turnout boot brand
• What is the composition of the earlap on the structure helmet?
• Which statement about the toe cap is accurate?
• The back of the glove is made from which fabric?
• Reflective trim dimensions on turnouts?
• What is the height of the 45-minute bottle?
• What components comprise the Brush helmet's head suspension system?
• When will turnout boots be worn?
• What material is used for the wildland shroud?
• What is the moisture barrier membrane made of?
• What material is the Brush helmet primarily made of?
• What is the hood barrier material type?
• What are the ballistic panels primarily composed of?
• How are brush helmets washed?
• What NFPA standards does the MSA G1 SCBA meet?
• What is the weight of the moisture barrier per square yard?
• How many pockets and attachment points are in our turnouts?
• Nomex pants stats
• How do we wash our turnouts?
• Boots made of
• What is the vest's weight?
• What ratio is used for heavily soiled areas?
• When should the wildland shroud be worn?
• Which color is used for shield for probationary firefighters?
• Which brand is associated with the body armor?
• The work uniform is made of which material?
• What is T toe for?
• Where is the pressure-demand exhalation valve located?
• Nomex pants made out of
• What does the second stage regulator include?
• What eye protection is integrated into the structure helmet?
• Turnout boots are how tall and include what feature?
• Structure gloves meet which NFPA standard?
• Which statement correctly describes the facepiece cleaning sequence?
• Which color is one of the five color bands used on the bottle?
• What form do you complete if turnouts are damaged?
• Which two components comprise the boots' two-layer construction?
• What are the shell thickness measurements for the crown and brim?
• Which of the following are inspected on Structure gloves?
• How long must the PASS device be held down for activation?
• Which NFPA standards are met by turnout boots?
• What battery percentage triggers replacement for specialty spares?
• What feature enables better off-air speech in the mask?
• Turnout boots are worn to which incidents?
• What is the extent of the Scotchlite reflective tape on the jacket?
• What is the shell material of the structure helmet?
• How should gloves be cleaned?
• When should the brush jacket be worn?
• How should brush jacket and brush pants be cleaned?
• What color identifies chiefs on brush helmets?
• What percent of outer shell material is in the ballistic vest?
• What happens at low air pressure that makes it easier for RIC teams to connect to the UAC?
• What should not be used on any SCBA pieces?
• Which indicator signals a temperature alarm?
• How many belt loops does the uniform have?
• Jacket wristlets prevent
• What is the weight of the Brush helmet?
• What are our wristlets made from?
• When should the bypass valve be adjusted?
• Which of the following is NOT one of the major components of the MSA G1 SCBA?
• What is added on the glove knuckles?
• When is the hood worn?
• What is the weight of the 45 min bottle?
• What audible indication confirms the iTIC has been activated?
• Which description matches the HUD status 3/4?
• What is the weight of the chest pockets on the shirt?
• Why is PBI used in turnout gear?
• Why are turnouts bulky?
• The boots' inner liner provides waterproofing via which material?
• How is the suspension harness attached to the structure helmet?
• Meets which NFPA standards?
• The Drag Rescue Device (DRD) allows for
• Which color light illuminates the UAC fitting when air pressure is low?
• Turnout coat should be worn during all emergency responses and operations except when... ?
• After washing the hood, which drying method is recommended?
• How many pockets does the brush shirt have and what type?
• Who is responsible for replacing soft goods on the structure helmet?
• What size are the last name initials on the rear brim?
• What is the weight of the structure helmet?
• What is the chin strap made of and its adjustment configuration?
• How many pockets does the brush jacket have in total?
• What is the hood particulate filtration efficiency at 0.1 to 1.0 microns?
• When should soft goods be replaced?
• The body armor is designed to protect against which of the following?
• What are the shell dimensions of the structure helmet?
• What color are the Wildland pants?
• Nomex pants features
• Which reflector feature helps reduce glare?
• When shall our turnouts be worn?
• Nomex pants brand
• Which of the following detergents is appropriate for shell cleaning?
• What is the substrate used in the Crosstech Black 2F Nomex moisture barrier?
• Which of the following PASS device features is NOT currently approved for LAFD use?
• What is the brow pad material in the head suspension system?
• The connection from the first stage regulator to the second stage regulator is made by which component?
• What garment is used to cover the ballistic vest?
• Where is the bypass valve shut-off located?
• Construction style of Wildland gloves
• Which feature describes the brush jacket?
• What does air trapped in the thermal layers provide?
• How to clean turnout boots?
• During grass or brush incidents, which statement is correct?
• Structure gloves are constructed with fingers made of tanned grain cow leather and a back shell knit fabric of which materials?
• What are we checking for when inspecting turnouts?
• Dust respirators do not provide protection against which hazards?
• What should you look for during boot inspection?
• When should bee hoods be worn?
• What is the purpose of the impact cap system in the structure helmet?
• What is the flame and heat resistance test for goggles?
• EMS/Station boots are worn during which activities?
• What is the correct procedure when turnouts are damaged?
• What class of PPE are the turnouts?
• Who may decide to wear a brush jacket in lieu of a turnout coat during overhaul operations?
• What does the LFD marking indicate on the bottle?
• What is the helmet attachment method?
• Structure helmet meets which NFPA requirements?
• Which component uses non-woven apertured spunlace batting?
• What composes the thermal layer?
• Where are four buddy lights located on the SCBA?
• Which statement best describes turnout boot construction?
• What is the length of the second stage regulator hose?
• For a brush shirt, what are the required material and wearing guidelines?
• What washing parameters are specified for cleaning the structure helmet shell?
• What is Glide Ice PBI G2 described as in the turnout's construction?
• What batting type is used in the thermal layer?
• What is the brand of the work uniform?
• Do turnout boots protect against biological or radiological hazards?
• What is the hood composition?
• Which statement correctly describes the bottle securing points on the harness?
• Which is a listed feature of the work uniform?
• How should turnouts be dried after washing?
• How often should specialty apparatus and fire station spares be checked at a minimum?
• Which statement best describes the goggles' lens specification?
• How many tetrahedron-shaped retroreflective trim pieces are around the crown, and what are they made of?
• How many Velcro secured cargo pockets do the Wildland yellow pants have?
• What is the status of the red running man light on this equipment?